Page 1 of 1

CCS-Class Battlecruiser

Posted: Sat Mar 02, 2013 12:35 am
by FrostWyrmWraith
Here it is, the first mod I've decided is ready for sharing. The Covenant battlecruiser featured heavily in the Halo series! It starts with a slug and two engi, and replaces the slug cruiser. It also adds the plasma torpedo to the game. It requires two power and has a fairly long charge up, but does two damage and is pretty much guaranteed to cause fires. I've play tested it extensively and the shields fit, the rooms match their positions and have glows, etc. It does, unfortunately, lack gibs- I do not think I have the skills to pull off gibs without making them look horrible, so some blank images will have to do.

You can download it here: https://www.dropbox.com/s/itkcau06jhftopl/ccs.ftl

And here are some screenshots. Sorry, but you'll have to download them since I shared through dropbox. D:

https://www.dropbox.com/s/h3wy3ocij4mrhmm/CCS.jpg

https://www.dropbox.com/s/ldar4d62qtxn9d3/CCS2.jpg

Tell me if there is anything wrong and I'll get it fixed ASAP.

I'll probably be sharing the Galactica and Pegasus next, so watch for that. They'll have KEW batteries and Vipers- I'm just working out the kinks at the moment. Enjoy!

Re: CCS-Class Battlecruiser

Posted: Sat Mar 02, 2013 3:08 am
by UltraMantis
Sexy! :D

Re: CCS-Class Battlecruiser

Posted: Sun Mar 03, 2013 7:50 pm
by nataryeahbuddy
When is the modpack going to be done? Looking good.

Re: CCS-Class Battlecruiser

Posted: Mon Mar 04, 2013 6:12 pm
by FrostWyrmWraith
What modpack are you referring to? If you mean the Battlestars, I released those in a separate thread. If you're asking about more Halo ships, I'm considering making a few of those but there's no time table on it as of yet.

Re: CCS-Class Battlecruiser

Posted: Mon Mar 04, 2013 7:14 pm
by speedoflight
Nice good looking but u should change the engines room and make it 2x2 at most, cuz air vent will not work correctly in 3x3 rooms.. only 2x2, 2x1, 1x2 rooms are supported as far as i know..

Re: CCS-Class Battlecruiser

Posted: Mon Mar 04, 2013 10:00 pm
by UltraMantis
speedoflight wrote:Nice good looking but u should change the engines room and make it 2x2 at most, cuz air vent will not work correctly in 3x3 rooms.. only 2x2, 2x1, 1x2 rooms are supported as far as i know..

It will work, but the bottom two squares of the room will not be covered by the strips as they are only 2x2 squares in size. You could paint the system room floor to make that part of the room non-transparent. The glitch would be less noticable. Room really looks good in this size, i hope you keep it.

Re: CCS-Class Battlecruiser

Posted: Tue Mar 05, 2013 1:17 am
by FrostWyrmWraith
I'll leave the room as is. I was aware it wouldn't display correctly when I designed the room- I like the large engine room enough to ignore the incorrect zero atmosphere display, which doesn't bother me all that much.